S-200 Series Drill Unit
Stroke Lengths – 2″ and 4″
Drill capacity – .25″ in Steel
Tap Capacity – .25″ in Steel
Drill Point Thrust:
- Piston Area – 2.35 sq. in.
- 235 lbs. drill point thrust @ 100 psi air pressure
- 470 lbs. drill point thrust @ 200 psi hydraulic pressure
Torque Rating – 38 in. lbs.
Spindle Speed – 14,000 RPM max.
Spindle – #2 Jacobs Taper, Full options available.
Spindle Drive – From offset motor thru pulleys and belts to unit pulley shaft
Description
| Model | Stroke | A | B | C |
|---|---|---|---|---|
| S200 | 2″ | 3.25 | 4.75 | 13.63 |
| S24 | 4″ | 5.25 | 6.75 | 17.63 |
Engineering Info & Drawings
| Model | Download 2D | Download 3D |
|---|---|---|
| S200 Series Unit | 2D DWG | 3D IGS |
| S200 Series Unit with 5880 Bracket | 2D DWG | 3D IGS |
| S200 Series Unit with 1325 Sub Base | 2D DWG | 3D IGS |
| S200 Series Unit with 19233 Motor Mount Belt Guard | 2D DWG | 3D IGS |
| S200 Series Unit on 1321 Column Mount | 2D DWG | 3D IGS |
| S200 Series Unit on 2937 Fixed Vertical Mount | 2D DWG | 3D IGS |
Setup Sheets
Additional information
| Drill Capacity Steel (inches) | 1/4" |
|---|---|
| Stroke Length (inches) | 2 & 4" |
| Tap Capacity Steel (inches) | 1/4" |
| Thrust @ 100 psi hyd. (pounds) | 235 |
| Thrust @ 200 psi hyd. (pounds) | 470 |
| Torque (in-lbs) | 38 |
