Skip to content

M-300 Series Drill Unit

Stroke Lengths – 3.5″, 6″ and 8″

Drill capacity – .38″ in steel with 100 psi air feed; .50″ in steel with 200 psi hydraulic feed

Tap Capacity – .50″ in Steel

Drill Point Thrust:

  • Piston Area – 4.66 sq. in.
  • 466 lbs. drill point thrust @ 100 psi air pressure
  • 932 lbs. drill point thrust @ 200 psi hydraulic pressure

Torque Rating – 420 in. lbs.

Spindle Speed – 5,000 RPM max. (higher spindle speeds with air mist lubrication on bearings.)

Spindle – #2 Jacobs Taper, Full options available.

Spindle Drive – Thru direct mounted motor.

Description

M 350 2d

Model A B C D
M-350 6.19 7.06 22.38 23.25
M-36 8.68 9.56 27.18 28.06
M-38 10.68 11.56 31.18 32.06

Engineering Info & Drawings

Model Download 2D Download 3D
M300 Series Unit 2D DWG 3D IGS
M300 Series Unit with 18658 Sub-Base Mounting Pads 2D DWG 3D IGS
M300 Series Unit with 1218 Column Mount 2D DWG 3D IGS
M300 Series Unit with 2937 Fixed Vertical Mount 2D DWG 3D IGS

Setup Sheets

Model Download
M300 Series Optional Spindles (PDF) PDF
M300 Series Optional Spindles 2D DWG DWG

Additional information

Drill Capacity Steel (inches)

1/2"

Tap Capacity Steel (inches)

1/2"

Stroke Length (inches)

3-1/2 to 8"

Thrust @ 100 psi hyd. (pounds)

466

Thrust @ 200 psi hyd. (pounds)

932

Torque (in-lbs)

38

Scroll To Top