Skip to content

DQ-500 Series Drill Unit

Stroke Lengths – 6″, 8″, 10″ and 12″

Drill capacity – Determined by feed pressure and motor horsepower.

Tap Capacity – Determined by feed pressure and motor horsepower.

Drill Point Thrust:

  • Piston Area -16.49 sq. in.
  • 1649 lbs. drill point thrust @ 100 psi air pressure
  • 4122 lbs. drill point thrust @ 250 psi hydraulic pressure

Torque Rating – 900 in. lbs.

Spindle Speed – 3,600 RPM max. (maximum with pre-greased bearings; higher RPM with special bearings or air mist lubrication on bearings.)

Spindle – #3 or #4 Morse Female Taper Standard. Full options available.

Spindle Drive – From offset motor thru pulleys and belts to unit pulley shaft.

Description

Dq 56 2d

Model Stroke A B C    
DQ-56 6″ 9.84 14.78 33.84 .63 11.56
DQ-58 8″ 11.84 16.78 39.84 2.63 13.59
DQ-510 10″ 13.84 18.78 45.84 4.63 15.59
DQ-512 12″ 15.84 20.78 51.84 6.63 17.59

Engineering Info & Drawings

Model Download 2D Download 3D
DQ500 Series Unit 2D DWG 3D IGS
DQ500 Series unit with 3133 Longitudinal Mount 2D DWG 3D IGS
DQ500 Series Unit with 8426 Fixed Vertical Mount 2D DWG 1 | 2D DWG 2 3D IGS
DQ500 Series Unit with 6400 Fixed Vertical Mount 2D DWG 1 | 2D DWG 2 3D IGS

Setup Sheets

Model Download
DQ500 Series Optional Spindles (PDF) PDF
DQ500 Series Optional Spindles 2D DWG DWG

Additional information

Drill Capacity Steel (inches)

1" +

Tap Capacity Steel (inches)

1" +

Stroke Length (inches)

6 to 12"

Thrust @ 100 psi hyd. (pounds)

1649

Thrust @ 200 psi hyd. (pounds)

4122

Torque (in-lbs)

900

Scroll To Top