DQ-400 Series Drill Unit
Stroke Lengths – 6″
Drill capacity – .75″ in steel
Tap Capacity – .75″ in Steel
Drill Point Thrust:
- Piston Area – 11.07 sq. in.
- 1107 lbs. drill point thrust @ 100 psi air pressure
- 2214 lbs. drill point thrust @ 200 psi hydraulic pressure
Torque Rating – 420 in. lbs.
Spindle Speed – 5,000 RPM max.
Spindle – #2 or #3 Morse Female Taper Standard. Full options available.
Spindle Drive – From offset motor thru pulleys and belts to unit pulley shaft.
Description
Engineering Info & Drawings
| Model | Download 2D | Download 3D |
|---|---|---|
| DQ400 Series Unit | 2D DWG | 3D IGS |
| DQ400 Series Unit with 1199 Sub-Base and 18538 Motor Mount Belt Guard | 2D DWG | 3D IGS |
| DQ400 Series Unit with 1959 Longitudinal Mount | 2D DWG | 3D IGS |
| DQ400 Series Unit with 3140 Column Mount | 2D DWG | 3D IGS |
| DQ400 Series with 8426 Fixed Vertical Mount | 2D DWG | 3D IGS |
Setup Sheets
Additional information
| Drill Capacity Steel (inches) | 3/4" |
|---|---|
| Tap Capacity Steel (inches) | 3/4" |
| Stroke Length (inches) | 6" |
| Thrust @ 100 psi hyd. (pounds) | 1107 |
| Thrust @ 200 psi hyd. (pounds) | 2214 |
| Torque (in-lbs) | 420 |
