DQ-300 Series Drill Unit

Stroke Lengths – 3.5″, 6″, 8″, 10″ and 12″

Drill capacity – .38″ in steel with 100 psi air feed; .50″ in steel with 200 psi hydraulic feed

Tap Capacity – .50″ in Steel

Drill Point Thrust:

  • Piston Area – 4.66 sq. in.
  • 466 lbs. drill point thrust @ 100 psi air pressure
  • 932 lbs. drill point thrust @ 200 psi hydraulic pressure

Torque Rating – 420 in. lbs.

Spindle Speed – 5,000 RPM max. (higher spindle speeds with air mist lubrication on bearings.)

Spindle – #2 Jacobs Taper, Full options available.

Spindle Drive – From offset motor thru pulleys and belts to unit pulley shaft.

Description

Dq350 2d

Model A B C D E F
DQ-350 6.19 7.06 19.06 7.69 2.25 .75
DQ-36 8.69 9.56 24.06 10.00 2.44 .75
DQ-38 10.69 11.56 28.00 11.88 2.13 1.187
DQ-310 12.69 13.56 33.00 13.49 2.13 1.187
DQ-312 14.69 15.56 40.44 15.19 2.13 1.187

Engineering Info & Drawings

Model Download 2D Download 3D
DQ300 Series Unit 2D DWG 3D IGS
DQ300 Series Unit with 1218 Column Mount 2D DWG 3D IGS
DQ300 Series Unit with 18658 Sub-Base 2D DWG 3D IGS
DQ300 Series Unit with 2937 Fixed Vertical Mount 2D DWG 3D IGS
DQ300 Series Unit with 18538 Motor Mount Belt Guard 2D DWG 3D IGS
Two DQ300 Series Units with 489 Motor Mount 2D DWG 3D IGS

Setup Sheets

Model Download
DQ300 Series Optional Spindles (PDF) PDF
DQ300 Series Optional Spindles 2D DWG DWG

Additional information

Drill Capacity Steel (inches)

1/2"

Tap Capacity Steel (inches)

1/2"

Stroke Length (inches)

3-1/2 to 12"

Thrust @ 100 psi hyd. (pounds)

466

Thrust @ 200 psi hyd. (pounds)

932

Torque (in-lbs)

420