ISO9001:2015 QMS
Here are four Hypneumat DQ310EHB drilling units with ER40 spindles and 2 HP 3600 rpm motors. The motors are mounted using our motor mount belt guard. Per customer’s request, the units have 10″ of stroke, silicone-filled hydra-brakes, sealed bearings, and oversized...
These five M style units are equipped with Commander 850 series multi-heads. The multiple spindles heads each include guide rods and five adjustable spindles.
Hypneumat made this custom billet-style 4-spindle multi-head for a customer’s application. This head is powered by a Hypneumat DQ46EHB auto-feed drilling unit.
This Hypneumat DQ56EHB drilling machine drives an 8-spindle Commander 4-36 multi-head. The machine rests on a 54″ by 48″ table and uses a 5 HP 1200 rpm motor.
These three M-series (direct drive) units with varying lengths are capable of drilling holes at closer centers that would not otherwise be possible with our standard auto feed drilling units. The center unit has an extended rear housing so the 1 HP, 3600 rpm motors...
This Hypneumat Machine consists of 2 opposing DQ46EHB drilling units with ER40 collet nosed spindles, 3 HP VFD motors mounted on a 7’ long machine base wired with full controls and ready for customer’s part fixture. Application: drilling 21/32” holes in forged...
Connect With Us