Idea Center
Drill Press Conversion
Add new life to an old drill press base. Hypneumat mounted a DQ36EHB drilling unit with new controls and opto-touch sensors to an existing drill press base. This provided the customer with a cost effective automated drilling machine.
Commander 500 Series 2-Spindle Drilling and Tapping Heads
Above are 3 Commander 500 series 2-spindle heads, powered by 2 Hypneumat LS350E lead screw tapping units and a Hypneumat M200EHB drilling unit. All three units are equipped with a 1 HP motor (1,200 rpm for the tappers and 1,800 rpm for the driller). These drilling and...
Hypneumat 4 station deep hole peck drilling machine
This 4 station automatic deep hole drilling machine peck drills 4 parts at one time. This set-up allows for 1 operator to man numerous 4 station drilling machines.
Hypneumat Swaging Machine
Check out the Swaging Machine built by Hypneumat, Inc. and XL Machine. This machine makes easy work of swaging together a die cast hub and grinding disk. The heart of the machine, a DQ46 Hypneumat unit is operated with a VFD Hydraulic power pack, linear position...
Integral 3 Spindle Drilling Units
Hypneumat has manufactured an integral 3 spindle drill unit with ER16 quick change tool holders and a 2 HP motor. 16 of these automatic drill units will be set-up inline on a gantry system to drill 48 holes in a row.
The Case For A Rebuild
Before → AfterWith companies looking to stretch efficiencies to the maximum, Hypneumat plays a role in the regeneration of old machinery bringing new life to production and the bottom line.THE CASE FOR A REBUILD Hypneumat received a call from an Erie PA customer...
Hypneumat 4-Spindle Drill Head
Check out this Hypneumat 4-spindle drill head with ER16 collets and guide rods powered by DQ350 deep hole auto-feed unit.
No. You’re Not Seeing Double.
No, you're not seeing double. This 2 machine project was for a current customer in Mexico. Each drilling and tapping machine has an automatic DQ46EHB drilling unit and LS36E lead screw tapping unit, with controls and is ready for the customer's part holding fixtures.
Hypneumat DQ350EHB 3.5" Stroke Drilling Unit
A robust Hypneumat DQ350EHB 3.5" stroke drilling unit with ER25 collet and coolant thru spindle ready for installation.
High speed spindle options
Automatic drilling units with 10,000 and 14,000 RPM spindle speed options for drilling of smaller diameter holes. Check out the S200 Series Drill Unit with faster spindle speeds.
Connect With Us