Idea Center
Commander 8-12 (12) Spindle Drilling Head
Shown is a 12 Station Dial Index Chamfering Machine built by Hypneumat, Inc. This machine chamfers 6 holes on 2 parts at one time and automatically ejects completed parts into a bin after each cycle. This 6 spindle Commander 500 Series multi head is powered by a...
Hypneumat 16 Spindle Drilling System
This drilling system consists of a Hypneumat DQ58 Pneumatic Feed Unit and 16 Spindle Drill Head. 1,650 pounds of thrust, 7.5 HP motor at 2,000 rpm spindle speed, ER16 collet spindles, and spring loaded drill bushing plate.
Hypneumat 6 spindle drilling units
Hypneumat just completed over a dozen 6 spindle drilling heads. These robust fixed spindle gear driven heads have (6) ER16 collet spindles set at 1.5″ centers.
Hypneumat Vertical Tapping Station
This tapping station consists of a Hypneumat LS46E Lead Screw Tapper and Centreline 6 spindle tapping head. A 7.5HP SEW motor is driving the (6) 3/4″ straight bore spindles at 600 rpm, roll forming 1/4-20 threads. These components are mounted on a Hypneumat fixed...
Automatic High Speed Tapping Machine
Hypneumat recently built this slant bed tapping machine equipped with a LS36E Lead Screw tapper and Vibra-Flight vibratory bowl and part feeding magazine. This machine will tap a 1/4-28 thread with unattended operation. Full electrical and pneumatic controls, quick...
Bench Style Swaging Machine
Hypneumat recently built another swaging machine for a local customer’s aerospace application. This bench style machine will swag bearings, utilizing a Hypneumat DQ350EHB power feed unit and a Cabco Industries tri-roller tool. This machine was designed to allow for...
12" Stroke Hypneumat Servo Tapper
The Hypneumat FX312 Ball Screw Rail Unit shown has 12” of stroke, is equipped with a 1-1/16” straight bore spindle and has servo motors for the linear feed and spindle. This allows for programmable synchronous control between the axial feed and spindle speed. This...
Heavy Duty FX46 Servo Controlled Unit
Hypneumat offers a Heavy Duty FX46 Servo Feed Ball Screw Rail Unit. The unit shown is equipped with an ER40 spindle, 10 HP spindle motor, 6 inches of stroke, and has a thrust capacity of 1,500 lbf dynamic. This automatic feed unit will perform a demanding tapered...
Robot Spindle Block attachment
This Hypneumat FX3 Series ER40 spindle block and motor mount belt guard will be mounted to a robot arm to perform a milling operation.
Drill Press Conversion
Add new life to an old drill press base. Hypneumat mounted a DQ36EHB drilling unit with new controls and opto-touch sensors to an existing drill press base. This provided the customer with a cost effective automated drilling machine.
Connect With Us