Idea Center
DQ500 and Commander 4-36
This Hypneumat DQ56EHB drilling machine drives an 8-spindle Commander 4-36 multi-head. The machine rests on a 54″ by 48″ table and uses a 5 HP 1200 rpm motor.
M200EHB with Air Motor
Shown here is one of our M200EHB series drilling units with a 1 HP 2000 rpm Gauss air motor. Air motors were utilized for this application because of their smaller motor frame allowing for multiple units to be mounted in line to drill close-center holes. This unit has...
Commander 8-12 with Adjustable Spindles
This Commander 8-12 series multiple-spindle head has 12 universal joint spindles. These collet style spindles can be adjusted for different hole patterns.
Three M Units with Tight Pattern
These three M-series (direct drive) units with varying lengths are capable of drilling holes at closer centers that would not otherwise be possible with our standard auto feed drilling units. The center unit has an extended rear housing so the 1 HP, 3600 rpm motors...
DQ46EHB with Quill Stabilizer
A Hypneumat Quill Stabilizer option can be added to our auto feed drilling units allowing for a rigid tool feed to offset high side load applications. This also provides an accurate and concentric tool feed for tight tolerance drilling and reaming operations. The...
Dual Tapping Machine
Hypneumat Dual Tapping Machine with (2) LS36E Lead-Screw Tappers, (2) 3 spindle MH Series Multi-Heads, part holding fixtures, laser part presence and tap detection sensors, coolant tank, guarding, light curtain, full controls, wired and ready to run.
FX38 Rail Unit with HSK-C-50 Spindle
Shown is our FX38 Ball Screw Rail Unit equipped with a precision ground HSK-C-50 series spindle and Guhring clamping mechanism. The axial movement is powered by a 1.0 kW Mitsubishi servo motor, and the spindle a 1.5 kW servo spindle motor. Unit capabilities are 815...
200 Series Food Grade Pneumatic Hypneumat Units
These S24 series Hypneumat units are custom built, per customer specifications, for the food industry. The units are fully chromed or anodized and utilize food grade oils and greases for lubrication. Capabilities: 4″ stroke length, 235 lbf of thrust at 100 psi, and 38...
M46 Series Food Grade Hypneumat Unit
This Hypneumat DQ46 series feed unit is built to order for a food grade application. These units have aluminum front and rear heads, cylinder body, and rear housing. The remaining key parts are stainless steel; spindle, quill, and fasteners. All lubrication, including...
7 Station Semi-Automatic Swaging Machine (Hubbing Machine)
This Hypneumat-built machine will automatically apply adhesive and swage all types of abrasive and grinding wheels. The machine is manually loaded and has an auto unload station for high volume swaging/hubbing applications. Once the die cast hub is placed in station...
Connect With Us