Posts by John Weber

12" Stroke Hypneumat Servo Tapper

FX312 Hypneumat Servo Tapper

The Hypneumat FX312 Ball Screw Rail Unit shown has 12” of stroke, is equipped with a 1-1/16” straight bore spindle and has servo motors for the linear feed and spindle. This allows for programmable synchronous control between the axial feed and spindle speed.  This unit can be programmed to drill, tap, ream, bore, mill etc… …

Read More

Heavy Duty FX46 Servo Controlled Unit

Fx46 Hypneumat Servo Boring Unit 2

Hypneumat offers a Heavy Duty FX46 Servo Feed Ball Screw Rail Unit.  The unit shown is equipped with an ER40 spindle, 10 HP spindle motor, 6 inches of stroke, and has a thrust capacity of 1,500 lbf dynamic.  This automatic feed unit will perform a demanding tapered boring operation.   The axial servo motor allows for boring depth and feed…

Read More

Drill Press Conversion

Clausing Base With Hypneumat Drill Unit

Add new life to an old drill press base. Hypneumat mounted a DQ36EHB drilling unit with new controls and opto-touch sensors to an existing drill press base.  This provided the customer with a cost effective automated drilling machine.

Read More

Commander 500 Series 2-Spindle Drilling and Tapping Heads

Hypneumat 2 Spindle Commander Heads Powered By Ls350e And M200ehb

Above are 3 Commander 500 series 2-spindle heads, powered by 2 Hypneumat LS350E lead screw tapping units and a Hypneumat M200EHB drilling unit.  All three units are equipped with a 1 HP motor (1,200 rpm for the tappers and 1,800 rpm for the driller).  These drilling and tapping heads are setup with fixed spindle plates.

Read More

Hypneumat Swaging Machine

Hypneumat Swaging Machine

Check out the Swaging Machine built by Hypneumat, Inc. and XL Machine.  This machine makes easy work of swaging together a die cast hub and grinding disk.  The heart of the machine, a DQ46 Hypneumat unit is operated with a VFD Hydraulic power pack, linear position sensor, laser measurement sensor and HMI programmable controller.  Feed rate, swaging force, dwell force and…

Read More

Integral 3 Spindle Drilling Units

3 Spindle Drill Unit - S24ehb

Hypneumat has manufactured an integral 3 spindle drill unit with ER16 quick change tool holders and a 2 HP motor. 16 of these automatic drill units will be set-up inline on a gantry system to drill 48 holes in a row.

Read More

The Case For A Rebuild

Hypneumat Machine Refurbishment Before After

Before                                                                                                    After With companies looking to stretch efficiencies to the maximum, Hypneumat plays a role in the regeneration of old machinery bringing new life to production and the bottom line. THE CASE FOR A REBUILD Hypneumat received a call from an Erie PA customer inquiring about Commander replacement parts. Our client has been a long time…

Read More