Dual Tapping Machine

Dual Tapping Machine

Hypneumat Dual Tapping Machine with (2) LS36E Lead-Screw Tappers, (2) 3 spindle MH Series Multi-Heads, part holding fixtures, laser part presence and tap detection sensors, coolant tank, guarding, light curtain, full controls, wired and ready to run.

Read More

FX38 Rail Unit with HSK-C-50 Spindle

FX38 Rail Unit with HSK-C-50 Spindle

Shown is our FX38 Ball Screw Rail Unit equipped with a precision ground HSK-C-50 series spindle and Guhring clamping mechanism. The axial movement is powered by a 1.0 kW Mitsubishi servo motor, and the spindle a 1.5 kW servo spindle motor. Unit capabilities are 815 lbf of dynamic thrust, 8” stroke and 50 lb-ft of…

Read More

200 Series Food Grade Pneumatic Hypneumat Units

200 Series Food Grade Pneumatic Hypneumat Units

These S24 series Hypneumat units are custom built, per customer specifications, for the food industry. The units are fully chromed or anodized and utilize food grade oils and greases for lubrication. Capabilities: 4” stroke length, 235 lbf of thrust at 100 psi, and 38 lb-in of spindle torque.

Read More

M46 Series Food Grade Hypneumat Unit

M46 Series Food Grade Hypneumat Unit

This Hypneumat DQ46 series feed unit is built to order for a food grade application. These units have aluminum front and rear heads, cylinder body, and rear housing. The remaining key parts are stainless steel; spindle, quill, and fasteners. All lubrication, including bearings, utilize food grade oils and greases. Capabilities: 6” stroke length, 1,107 lbf…

Read More

7 Station Semi-Automatic Swaging Machine (Hubbing Machine)

7 Station Semi-Automatic Swaging Machine (Hubbing Machine)

This Hypneumat-built machine will automatically apply adhesive and swage all types of abrasive and grinding wheels. The machine is manually loaded and has an auto unload station for high volume swaging/hubbing applications. Once the die cast hub is placed in station one and a disk in station three, part present sensors verify the appropriate components…

Read More

Drill and Tap Shuttle Machine

Drill and Tap Shuttle Machine

This Hypneumat Shuttle Machine was built for drilling and tapping a cast iron housing. The machine is equipped with one DQ56EHB drilling unit capable of 1600 lbf of thrust and a DQ56E equipped to tap a 0.55-12 thread with 75 lb-ft of torque. The Shuttle Machine is guarded on 3 sides and has a light…

Read More

Hypneumat Hydra-Brakes

Hydra-Brakes

The Hypneumat “Hydra-Brake” is a self-contained hydraulic checking cylinder with optional push or pull type of operation. It’s ideal for providing a consistent and controlled stroke speed which is critical for many applications. Typically, the Hydra-Brake is mounted adjacent to or in-line with the tool or cylinder to by hydraulically controlled. Feed control is maintained…

Read More

Opposing Drilling Unit Machine

Drilling Unit

This Hypneumat Machine consists of 2 opposing DQ46EHB drilling units with ER40 collet nosed spindles, 3 HP VFD motors mounted on a 7’ long machine base wired with full controls and ready for customer’s part fixture. Application: drilling 21/32” holes in forged parts.

Read More